Home > Smoke & heat ventilation > Wind and rain sensor SET
Awaiting product image

Wind and rain sensor SET

Reference number:

Wind sensor Type III : 482021
Application : Anemometer with 3 impact resistant wind cups (PA6) for wind speed detection.

Rain sensor Typ III 24 V DC : 480210
Application : Rain sensor with heated sonsor surface and internal control with volt free output contact

Rain sensor Typ III 230 V AC : 480110
Application : Rain sensor with heated sonsor surface and internal control with volt free output contact.

WR-Set Type 7x/8x – Wind and Rain Sensor Set : 482100
Application : Sensors for wind and rain to work with an evaluation unit WRAG2 or Typ IV, a WM module or directly with a SHEV control unit, for closing and blocking the natural ventilation under bad weather conditions.

Wall bracket for wind and rain sensor : 491200
Application : Wall bracket with dual fixings for wind and rain sensors.

Pole bracket for wind and rain sensors : 491101
Application : Pole bracket for the fixing of wind and rain sensors at flat roofs

Mention the desired references

Ask price Quotation
#

Technical data

Wind sensor Type III Operating voltage: 24 V DC (+/- 20%) : 482021
Measuring principle: Pulse generator, ball beared
Housing: Aluminium Æ36 mm, untreated
Wind cups: PA6, black
Dimensions: 250 x 250 x 80 mm
Connection cable: non-halogen cable, approx. 4 m

Rain sensor Typ III 24 V DC : 480210
Operating voltage: 24 V DC (+/- 20%)
Standby current: <150 mA
Measuring principle: Conductivity measurement, heated sensor
Hysteresis: 5 min
Display: Output active
Output: Change-over switch, 5 A / max. 48 V
Protection rating: IP65
Housing: Surface mounting, ABS black with bracket (stainless steel)
Dimensions: 100 x 85 x 172 mm
Connection cable: non-halogen cable, approx. 4 m

Rain sensor Typ III 24 V DC : 480210
Operating voltage: 24 V DC (+/- 20%)
Standby current: <150 mA
Measuring principle: Conductivity measurement, heated sensor
Hysteresis: 5 min
Display: Output active
Output: Change-over switch, 5 A / max. 48 V
Protection rating: IP65
Housing: Surface mounting, ABS black with bracket (stainless steel)
Dimensions: 100 x 85 x 172 mm
Connection cable: non-halogen cable, approx. 4 m

Rain sensor Typ III 230 V AC : 480110
Operating voltage: 230 V AC (50 Hz)
Power consumption: <1,5 VA
Measuring principle: Conductivity measurement
Display: Output active
Output: Change-over switch, 5 A / max. 230 AC
Protection rating: IP65
Housing: Surface mounting, ABS black with bracket (stainless steel)
Dimensions: 100 x 85 x 172 mm
Connection cable: non-halogen cable, approx. 4 m

WR-Set Type 7x/8x – Wind und Rain Sensor Set : 482100
Rated voltage: 24 V DC (+/- 20%)
Rain sensor Type III – heated sensor surface, switch-off delay approx. 5 min.
Contact: 1 Change-over switch, max. 48 V / 5A
Current consumption: <150 mA
Housing: Surface mounting, ABS black with stainless steel bracket
Dimensions (WxHxD): 100 x 85 x 172 mm
Connection cable: Non-halogen cable, approx. 4 m
Volt free contac: 1 Change-over switch, max. 48 V / 1A
Wind sensor Type III – Anemometer with 3 impact resistant wind cups (PA6)
Measuring principle: Pulse generator
Dimensions: 250 x 250 x 80 mm
Connection cable: non-halogen cable, approx. 4 m

Wall bracket for wind and rain sensor : 491200
Height: app. 1500 mm
Outreach: app. 510 mm
Material: Aluminium 36mm

DOWNLOADS

Technical information
Catalogues