Home > Smoke & heat ventilation > Spindle actuators > PLA8 S3/S12 24V 800N

PLA8 S3/S12 24V 800N

Mention the desired references

PROGRAMMABLE
100mm/s L442 PLA8 S12 : 515210
200mm/s L542 PLA8 S12 : 515220
300mm/s L642 PLA8 S12 : 515230
400mm/s L742 PLA8 S12 1 515240
500mm/s L842 PLA8 S12 : 515250
600mm/s L942 PLA8 S12 : 515260
750mm/s L1092 PLA8 S12 : 515275
1000mm/s L1342 PLA8 S12 : 515295		 NOT PROGRAMMABLE
100mm/s L402 PLA8 S3 : 523710
200mm/s L502 PLA8 S3 : 523720
300mm/s L602 PLA8 S3 : 523730
400mm/s L702 PLA8 S3 : 523740
500mm/s L802 PLA8 S3 : 523750
600mm/s L902 PLA8 S3 : 523760
750mm/s L1052 PLA8 S3 : 523775
1000mm/s L1302 PLA8 S3 : 523800

 

Ask price Quotation
##

PLA – Technical Data

Rated voltage 24V DC / 0,8 A – 2,5 A
 

Cut-off switch

 S3 – Load dependent cut-off switch with programmable motion monitored run (up to 300 mm stroke) and sequence control
S12 – Intelligent programmable cut-off switch S12; programmable for synchrosnised run and special functions
Pushing/Pulling force 600 N – 1600 N (depending on series)
Stroke 50 – 1000 mm  – (S12 version programmable)
Speed 4,0 – 12,6 mm/s – (S12 version programmable)
Housing (D x L) 36 mm, length depending on stroke
Opening mechanism Stainless steel spindle and spindle tube, ball beared with end postion damping
Protection rating IP 65
Certification NSHEV compliant with EN 12101-2

PLA8 – Version

Cut-off switch S3 – Internal load dependend cut-off switch, post cycle resistant
S12 – Integrated, intelligent cut-off switch

PLA – Options

  • Housing finish according to RAL
  • Extension of lead length
  • Mechanical stroke reduction
  • Front spindle tube with interior thread M8 or M10
  • Eye-bolts and clevis brackets for front and rear suspension
  • S3 – Programmable synchronised multi drive operation / sequence control
  • S12 – Special functions programmable (synchronised multi drive operation,
    electronic stroke reduction, closing force, speed)
  • Further options on request

PLA – Highlights

  • Electronic speed regulation for synchronous motor running and low noise development
  • Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
  • Suitable for surface mounted drives and concealed fitting within profiles
  • Robust, corrosion-resistant design
  • Universal brackets and casement brackets for all common profile systems
  • Various accessories for front and rear suspension
  • External modules for feedback of end-positions “OPEN” or “CLOSED”
  • Programmable parameters of intelligent S12 electronic cut-off switch:
    •  Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
    • Soft-start and soft-stop at the end positions
    •  Stroke length, closing force, speed
    •  Rebate control

PLA – Mounting

AUMÜLLER spindle drives can be used in SHEV systems and as well as for natural ventilation via automated windows, mainly in the roof area, but also in façades.

The window openers are installed surface mounted. The preferred installation locations are window frames (main closing edge or the side closing edge).

The area of application includes large, heavy to very heavy side-hung, bottom-hung, top-hung, friction hinged and parallel outward opening windows and skylights.

Synchronous operation with multi drive applications is possible, as well as sequential controls with locking drives. In the series with microprocessor-controlled cut-off switch a synchronous operation is also possible – without additional devices.

DOWNLOADS

Technical information
Catalogues
Certificates