AUMÜLLER FV locking drives have a drive force of 600 N. The attractive, slim aluminium housings lie flat against the profile. Window locking drives are used for the reliable locking an unlocking of all common window types in combination with various window drives.
FV1/FV3/FV4 24V 600N
Schreiben Sie die gewünschten Referenzen auf
FV – Technical Data
Rated voltage | 24V DC / 0,6 A |
Cut-off switch | FV1 – w/o internal cut-off switch and w/o sequence control, for use in SHEV hardware systems with USKM module FV3 – internal load dependend cut-off switch (S3) and sequence control for SHEV hardware sets (solo) with drives PL6 S1 / PL10 S1 (IA = 0,8 A) FV4 – internal load dependend cut-off switch (S3) and sequence control for drive version S3 and S12 |
Versions | 1, 2 or 3 locking points right, left |
Pushing/Pulling force | 600 N |
Running time | ~ 5 sec |
Housing (W x D x L) | 35 x 35 mm, length depinding on version |
Locking mechanism | Surface mounted locking angles |
Protection rating | IP 32 |
Space required on frame | min. 35 mm |
Certification | NSHEV compliant with EN 12101-2 |
FV1 – Version
Cut-off switch
FV1 – w/o internal cut-off switch and w/o sequence control, for use in SHEV hardware systems with USKM module
FV3 – Internal load dependend cut-off switch (S3) and sequence control for SHEV hardware sets (solo) with drives PL6 S1 / PL10 S1 (IA = 0,8 A)
FV4 – Internal load dependend cut-off switch (S3) and sequence control for drive version S3 and S12
Versions
1 Locking point / L = 420 mm
2 Locking points / L = 1200 oder 2000 mm
3 Locking points / L = 2000 mm
R = Right version
L = Left version
FV1 – Options
Aluminium housing finish according to RAL
Extension of lead length
Mounting plate for installation on the window frame profile of outward opening windows
or on the casement profile of inward opening windows
Slim locking bracket of 18mm for small mounting space on the window frame profile
Base plate for compensation of profile overlap
FV4 – S3: programmable sequence control for drives (S3/S12 SW V2)
Customised followers and strokes on request
FV – Highlights
- Sequence control with several drives
- Housing of natural, anodised aluminium, other RAL colours upon request
- Suitable for surface mounting
- Robust, corrosion-resistant design
- Easy to install due to concealed bores under bevelled end caps and therefore invisible screws
- Cable connection terminals below the end cap
- Small locking bracket for 18 mm mounting space on window frame profil
FV – Mounting
AUMÜLLER FV drives can be used in SHEV systems and as well as for natural ventilation via automated windows, mainly in façades as well as on roof windows.
The window openers are installed surface mounted. The preferred installation locations are window frames (main closing edge or the side closing edge).
The locking is provided by a locking bracket. All common types of windows can be reliably locked and unlocked with the available accessories, irrespective of the opening direction.
Users of locking drives consist primarily of window and façade constructors.
HERUNTERLADEN
- Data sheetFV1 / FV3 / FV4 24V DC
- Installation instructionsAssembly and Commissioning Instructions
- Application examples FV
- BracketsFV
- Catalogue Aumuller 2016Products
- Catalogue Aumuller 2016Control units
- Declaration of conformity FV - FVB - FVR - FVM - OFV
- Environmental product decl. EPD drives
- NSHEV EN12101-2 - Re1000+FV + KSA on top-hung window
- NSHEV EN12101-2 - Re1000+FV + PL6 on side-hung window
- NSHEV EN12101-2 - Re1000+FV + PLA10 on top-hung window
- NSHEV EN12101-2 - B300FV + KSA on top-hung window