KS2 S12 230V TANDEM SET 2x250N

Referenznummer:
KS2 200 S12 230V Set A (R/R) : 494220
KS2 200 S12 230V Set B (L/L) : 494320
KS2 200 S12 230V Set C (R/L-K) : 494420
KS2 300 S12 230V Set A (R/R) : 494230
KS2 300 S12 230V Set B (L/L) : 494330
KS2 300 S12 S 230V et C (R/L-K) : 494430
KS2 400 S12 230V Set A (R/R) : 494240
KS2 400 S12 230V Set B (L/L) : 494340
KS2 400 S12 230V Set C (R/L-K) : 494440
KS2 500 S12 230V Set A (R/R) : 494250
KS2 500 S12 230V Set B (L/L) :1 494350
KS2 500 S12 230V Set C (R/L-K) :1 494450
KS2 600 S12 230V Set A (R/R) :1 494260
KS2 600 S12 230V Set B (L/L) :1 494360
KS2 600 S12 230V Set C (R/L-K) :1 494460
KS2 800 S12 230V Set A (R/R) :1 494280
KS2 800 S12 230V Set B (L/L) :1 494380
KS2 800 S12 230V Set C (R/L-K) :1 494480

 

 

Schreiben Sie die gewünschten Referenzen auf

#

KS2 – Technical Data

Rated voltage 24V DC / 0,7A
230V AC / 0,13A
Cut-off switch S2 – Internal load dependent cut-off switch
S12 – Intelligent cut-off switch (programmable functions)
Pulling/Pushing force max. 250 N
Stroke 100 – 800 mm – (S12 programmable)
Speed 5 – 14 mm/s – (S12 programmable)
Housing (W x H x L) 42 x 26 mm, lenght depending on stroke
Opening mechnism Rigid backed stainless steel sidebow roller chain
Versions R (right), L (left), TWIN, Z, Set 230V/24V
Protection rating IP 32
Certification NSHEV compliant with EN 12101-2

KS2 – Version

Cut-off switch S12 – Integrated, intelligent load dependend cut-off switch
Variants Master:
· KS2 xxx S12 230V AC R / L with voltage output 24V DC
Slave:
· KS2 xxx S12 24V DC R / L with connection cable on motor side
· KS2 xxx S12 24V DC L-K with connection cable on chain side

KS2 – Options

  • Housing finish according to RAL
  • Extension of lead length
  • Synchronised multi operation
  • Electronic stroke reduction
  • Special functions programmable
  • Further options on request

KS2 – Highlights

  • Electronic speed regulation for synchronous motor running and low noise development
  • Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
  • Suitable for surface mounted drives and concealed fitting within profiles
  • Rigid drive mounting on frame without brackets
  • Universal brackets and casement brackets for all common profile systems
  • Sidebow roller chain of high-quality stainless steel for large opening angles with the smallest possible bending radii
  • The chain completely retracts into the housing to ease profile integrated mounting of the drives
  • Z-version:  programmable feedback limit position “OPEN” or “CLOSE”
  • TWIN-version with 2 chains and double force
  • Programmable parameters of intelligent S12 electronic cut-off switch:
    •  Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
    •  Soft-start and soft-stop at end of stroke control
    •  Rebate control
  • M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2)

KS2 – Mounting

Due to their compact design, the housings of KS2 chain drives from AUMÜLLER lie flat on the window profile and do not protrude into the room. The drives can be used in SHEV systems and for natural ventilation via automated windows, mainly in façades.

The window openers are either installed surface mounted or integrated into the profile. The preferred installation locations are window frames (main closing edge or the side closing edge).

It is possible to mount chain drives to inward- or outward opening side-hung, bottom-hung, top-hung, friction hinged, or parallel outward opening windows.

Because of a microprocessor-controlled load dependent cut-off switch, synchronous operation with multi drive applications or sequencial controls with locking drives or object-specific special solutions are possible without additional devices.

KS2 with F95 mounting to bottom-hung inward opening windows

KS2 with K94 F21 mounting to top-hung outward opening windows

HERUNTERLADEN

Technical information