PLA16 S12 24V 1600N

Referentienummer:

100mm/s L 442mm PLA16 100 S12 : 565710
200mm/s L 542mm PLA16 200 S12 : 565720
300mm/s L 642mm PLA16 300 S12 : 565730
400mm/s L 742mm PLA16 400 S12 : 565740
500mm/s L 842mm PLA16 500 S12 : 565750
600mm/s L 942mm PLA16 600 S12 : 565760
750mm/s L 1092mm PLA16 750 S12 : 565775
1000mm/s L 1342mm PLA16 1000 S12 : 565800

Noteer de gewenste referenties

##

PLA – Technical Data

Rated voltage 24V DC / 0,8 A – 2,5 A
 

Cut-off switch

S3 – Load dependent cut-off switch with programmable motion monitored run (up to 300 mm stroke) and sequence control
S12 – Intelligent programmable cut-off switch S12; programmable for synchrosnised run and special functions
Pushing/Pulling force 600 N – 1600 N (depending on series)
Stroke 50 – 1000 mm  – (S12 version programmable)
Speed 4,0 – 12,6 mm/s – (S12 version programmable)
Housing (D x L) 36 mm, length depending on stroke
Opening mechanism Stainless steel spindle and spindle tube, ball beared with end postion damping
Protection rating IP 65
Certification NSHEV compliant with EN 12101-2

PLA16 – Version

Cut-off switch S12 – Internal intelligent cut-off switch

PLA – Options

  • Housing finish according to RAL
  • Extension of lead length
  • Mechanical stroke reduction
  • Front spindle tube with interior thread M8 or M10
  • Eye-bolts and clevis brackets for front and rear suspension
  • S3 – Programmable synchronised multi drive operation / sequence control
  • S12 – Special functions programmable (synchronised multi drive operation,
    electronic stroke reduction, closing force, speed)
  • Further options on request

PLA – Highlights

  • Electronic speed regulation for synchronous motor running and low noise development
  • Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
  • Suitable for surface mounted drives and concealed fitting within profiles
  • Robust, corrosion-resistant design
  • Universal brackets and casement brackets for all common profile systems
  • Various accessories for front and rear suspension
  • External modules for feedback of end-positions “OPEN” or “CLOSED”
  • Programmable parameters of intelligent S12 electronic cut-off switch:
    •  Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
    • Soft-start and soft-stop at the end positions
    •  Stroke length, closing force, speed
    •  Rebate control

PLA – Mounting

AUMÜLLER spindle drives can be used in SHEV systems and as well as for natural ventilation via automated windows, mainly in the roof area, but also in façades.

The window openers are installed surface mounted. The preferred installation locations are window frames (main closing edge or the side closing edge).

The area of application includes large, heavy to very heavy side-hung, bottom-hung, top-hung, friction hinged and parallel outward opening windows and skylights.

Synchronous operation with multi drive applications is possible, as well as sequential controls with locking drives. In the series with microprocessor-controlled cut-off switch a synchronous operation is also possible – without additional devices.

DOWNLOADEN

Technical information
Catalogues
Certificates