PLA6 S3/S12 24V 600N

Numéro de référence :
100mm/s L 442mm PLA6 S12 : 546310
200mm/s L 542mm PLA6 S12 : 546320
300mm/s L 642mm PLA6 S12 : 546330
400mm/s L 742mm PLA6 S12 : 546340
500mm/s L 842mm PLA6 S12 : 546350
600mm/s L 942mm PLA6 S12 : 546360
750mm/s L 1092mm PLA6 S12 : 546375
1000mm/s L 1342mm PLA6 S12 : 546400
100mm/s L 402mm PLA6 S3 : 564110
200mm/s L 502mm PLA6 S3 : 564121
300mm/s L 602mm PLA6 S3 : 564130
400mm/s L 702mm PLA6 S3 : 564140
500mm/s L 802mm PLA6 S3 : 564150
600mm/s L 902mm PLA6 S3 : 564160
750mm/s L 1052mm PLA6 S3 : 564175
1000mm/s L 1302mm PLA6 S3 : 564200

Indiquer la référence souhaitée


PLA6 – Technical Data

Rated voltage 24V DC / 0,8 A – 2,5 A

Cut-off switch

S3 – Load dependent cut-off switch with programmable motion monitored run (up to 300 mm stroke) and sequence control
S12 – Intelligent programmable cut-off switch S12; programmable for synchrosnised run and special functions
Pushing/Pulling force 600 N – 1600 N (depending on series)
Stroke 50 – 1000 mm  – (S12 version programmable)
Speed 4,0 – 12,6 mm/s – (S12 version programmable)
Housing (D x L) 36 mm, length depending on stroke
Opening mechanism Stainless steel spindle and spindle tube, ball beared with end postion damping
Protection rating IP 65
Certification NSHEV compliant with EN 12101-2

PLA6 – Version

Cut-off switch S3 – Internal load dependend cut-off switch, post cycle resistant
S12 – Internal intelligent cut-off switch, synchronised run and special functions programmable

PLA6 – Options

  • Housing finish according to RAL
  • Extension of lead length
  • Mechanical stroke reduction
  • Front spindle tube with interior thread M8 or M10
  • Eye-bolts and clevis brackets for front and rear suspension
  • S3 – Programmable synchronised multi drive operation / sequence control
  • S12 – Special functions programmable (synchronised multi drive operation,
    electronic stroke reduction, closing force, speed)
  • Further options on request

PLA6 – Highlights

  • Electronic speed regulation for synchronous motor running and low noise development
  • Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
  • Suitable for surface mounted drives and concealed fitting within profiles
  • Robust, corrosion-resistant design
  • Universal brackets and casement brackets for all common profile systems
  • Various accessories for front and rear suspension
  • External modules for feedback of end-positions “OPEN” or “CLOSED”
  • Programmable parameters of intelligent S12 electronic cut-off switch:
    •  Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
    • Soft-start and soft-stop at the end positions
    •  Stroke length, closing force, speed
    •  Rebate control

PLA6 – Mounting

AUMÜLLER spindle drives can be used in SHEV systems and as well as for natural ventilation via automated windows, mainly in the roof area, but also in façades.

The window openers are installed surface mounted. The preferred installation locations are window frames (main closing edge or the side closing edge).

The area of application includes large, heavy to very heavy side-hung, bottom-hung, top-hung, friction hinged and parallel outward opening windows and skylights.

Synchronous operation with multi drive applications is possible, as well as sequential controls with locking drives. In the series with microprocessor-controlled cut-off switch a synchronous operation is also possible – without additional devices.


Technical information