KSA TWIN S12 24V DC 1200N

Referentienummer:

KSA TWIN 400 S12 24V : 522745
KSA TWIN 500 S12 24V : 522755
KSA TWIN 600 S12 24V : 522765

KSA TWIN 400 S12 24V Z : 522747
KSA TWIN 500 S12 24V Z : 522757
KSA TWIN 600 S12 24V Z : 522767

Noteer de gewenste referenties

Vraag prijsofferte

KSA TWIN – Technical Data

Nominaal Voltage	24V DC
Nominale stroom	1,8 A
Afschakeling stroom	2,4 A
Nominaal vermogen	43 W
Arbeidscyclus	30% (ON: 3 min./OFF: 7 min.)
Beschermingsgraad Elektrische inrichting	IP32
Gebruikstemperatuur	-5°C … +75°C
Maximale trekkracht	1.200 N
Duwkracht
Uittrekkracht	5.000 N
Ketting	Roestvrij staal
Kabel	Plug-in aan beide zijden (links & rechts) Halogeenvrije kabel grijs 5 x 0,5 mm² ̴ 3 m
Koerslengte (s) Lengte motor (L) Afstand tss kettingen (LM)	400 – 600 mm (± 5%) C 400 mm = L 1100 mm – LM 487 mm C 500 mm = L 1303 mm – LM 587 mm C 600 mm = L 1303 mm – LM 587 mm
Snelheid	Koerslengte 400 : duw 8,0 mm/s – trek 8,0 mm/s Koerslengte 500 – 600 : duw 12,0 mm/s – trek 8,0 mm/s
Programmeerbare functies	Koerslengte – Kracht – Snelheid Soft-start – soft-close – soft-stop
Programmeerbare feedback-limiet	Neen
Parallel schakeling	t.e.m. 8 motoren
RWA	Ja
Inbouw	Neen
Eindeloop	Elektronisch
Behuizing	Geanodiseerd aluminium
Synchronisatie	Via M-COM voor automatische synchronisatie

KSA TWIN – Version

Cut-off switch

S12 – Integrated, intelligent load dependend cut-off switch

KSA TWIN – Options

Aluminium housing anodized finish according to RAL
Extension of lead length
Electronic stroke reduction
Mechanical stroke reduction in 25mm steps
Special functions programmable
M-COM for automatic synchronised run of multi drive systems and automatic sequence control with FV locking drives (S3/S12 SW V2)
Further options on request

KSA – Highlights

Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation
Z-version: programmable feedback limit position “OPEN” or “CLOSE”
TWIN- or D-type version with 2 chains and double force
Suitable for surface mounted drives
Robust, corrosion-resistant design
Universal brackets and casement brackets for all common profile systems
Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height
The connection cable can be run out of the housing on either side
Programmable parameters of intelligent S12 electronic cut-off switch:
- Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
- Soft start and soft stop at the end of stroke control
- Stroke length, closing force, speed
- Rebate control
M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2)

KSA – Mounting

Due to their slim design, chain drives from AUMÜLLER lie flat on the window profiles. They can be used in SHEV systems and for natural ventilation via automated windows, mainly in façades.

The window openers are installed either installed surface mounted or integrated into the profile. The preferred installation locations are window frames (main closing edge or side closing edge).

It is also possible to mount chain drives to side-hung, bottom-hung, top-hung, friction hinged and parallel outward opening windows.

Because of a microprocessor-controlled load dependend cut-off switch, synchronous operation with multi drive applications or sequential controls with locking drives or object-specific special solutions are possible without additional devices.