KSA TWIN S12 24V DC 1200N

Numéro de référence :
KSA TWIN 400 S12 24V : 522745
KSA TWIN 500 S12 24V : 522755
KSA TWIN 600 S12 24V : 522765
KSA TWIN 400 S12 24V Z : 522747
KSA TWIN 500 S12 24V Z : 522757
KSA TWIN 600 S12 24V Z : 522767

Indiquer la référence souhaitée

##

KSA TWIN – Technical Data

Tension d’alimentation 24V DC
Absorption du courant en charge nominale 1,8 A
Absorption du courant en charge nominale en fin de course 2,4 A
Puissance absorbée en charge nominale 43 W
Fréquence d’utilisation 30% (ON: 3 min./OFF: 7 min.)
Indice de protection des dispositifs électrique IP32
Température de fonctionnement -5°C … +75°C
Force de traction 1.200 N
Force de poussée
Force statique 5.000 N
Chaîne Acier inoxidable
Câble Plug-in à la gauche et à la droite

Câble non-halogène gris 5 x 0,5 mm2  ̴  3 m

Course (s)

Longueur moteur (L)

Distance entre chaînes (LM)

400 – 600 mm (± 5%)

C 400 mm = L 1100 mm – LM 487 mm

C 500 mm = L 1303 mm – LM 587 mm

C 600 mm = L 1303 mm – LM 587 mm

Vitesse Course 400 : ouv. 8,0 mm/s – ferm. 8,0 mm/s

Course 500 – 600 : ouv. 12,0 mm/s – ferm. 8,0 mm/s

Fonctions programmables Course – Force – Vitesse

Soft-start – soft-close – soft-stop

Feedback-limite programmable Non
Branchement en parallèle Jusqu’à 8 moteurs
EFC Oui
Encastrable Non
Réglage fin de course Electronique
Habillage Aluminium anodisé
Synchronisation Via M-COM pour la configuration automatique

KSA TWIN – Version

Cut-off switch S12 – Integrated, intelligent load dependend cut-off switch

KSA TWIN – Options

  • Aluminium housing anodized finish according to RAL
  • Extension of lead length
  • Electronic stroke reduction
  • Mechanical stroke reduction in 25mm steps
  • Special functions programmable
  • M-COM for automatic synchronised run of multi drive systems and automatic sequence control with FV locking drives (S3/S12 SW V2)
  • Further options on request

KSA – Highlights

  • Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation
  • Z-version: programmable feedback limit position “OPEN” or “CLOSE”
  • TWIN- or D-type version with 2 chains and double force
  • Suitable for surface mounted drives
  • Robust, corrosion-resistant design
  • Universal brackets and casement brackets for all common profile systems
  • Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
  • Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height
  • The connection cable can be run out of the housing on either side
  • Programmable parameters of intelligent S12 electronic cut-off switch:
    •  Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
    •  Soft start and soft stop at the end of stroke control
    •  Stroke length, closing force, speed
    •  Rebate control
  •  M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2)

KSA – Mounting

Due to their slim design, chain drives from AUMÜLLER lie flat on the window profiles. They can be used in SHEV systems and for natural ventilation via automated windows, mainly in façades.

The window openers are installed either installed surface mounted or integrated into the profile. The preferred installation locations are window frames (main closing edge or side closing edge).

It is also possible to mount chain drives to side-hung, bottom-hung, top-hung, friction hinged and parallel outward opening windows.

Because of a microprocessor-controlled load dependend cut-off switch, synchronous operation with multi drive applications or sequential controls with locking drives or object-specific special solutions are possible without additional devices.

KSA and B1 F14 mounting to top hung outward opening window

KSA and D1 mounting to bottom hung inward opening window

TÉLÉCHARGEMENTS

Technical information
Catalogues
Certificates