AUMÜLLER FVB locking drives have a drive force of 600 N. The attractive, slim aluminium housings lie flat against the profile. A locking plate grips against the system-specific, proven window fitting. Window locking drives are used for the reliable locking an unlocking of all inward-opening windows in combination with various window drives.
FVB3/FVB4 24V 600N
Mention the desired references
FVB – Technical Data
Rated voltage | 24V DC / 0,6 A |
Cut-off switch | FVB3 – internal load dependend cut-off switch (S3) and sequence control for SHEV hardware sets (solo) with drives PL6 S1 / PL10 S1 (IA = 0,8 A) FVB4 – internal load dependend cut-off switch (S3) and sequence control for drive version S3 and S12 |
Pulling/Pushing force | 600 N |
Stroke | ~ 16 / 22 mm |
Running time | ~ 5 sec |
Housing (W x D x L) | 35 x 35 x 420 mm |
Opening mechanism | Stainless steel locking plate for window hardware |
Protection rating | IP 32 |
Space required on frame | min. 35 mm |
Certification | NSHEV compliant with EN 12101-2 |
FVR – Version
Cut-off switch | FVR3 – Internal load dependend cut-off switch (S3) and sequence control for SHEV hardware sets (solo) with drives PL6 S1 / PL10 S1 (IA = 0,8 A)
FVR4 – Internal load dependend cut-off switch (S3) and sequence control for drive version S3 and S12 |
FVR – Options
- Housing finish according to RAL
- Extension of lead length
- FVR4 – S3: programmable motion monitored run and
sequence control for drives (S3/S12 SW V2) - Customised followers and strokes on request
FVB – Highlights
- Sequence control with several drives
- Housing of natural, anodised aluminium, other RAL colours upon request
- Suitable for surface mounting
- Robust, corrosion-resistant design
- High all-round integrity of the windows due to operation of the proven window
fitting via an additional locking roller - Easy to install due to concealed bores under bevelled end caps and therefore invisible screws
- Cable connection terminals below the end cap
- Concealed cable connection terminals below the end caps
- Concealed DIP switches for setting the moving direction
FVB – Monting
AUMÜLLER FVB locking drives can be used in SHEV systems and as well as for natural ventilation via automated windows in façades.
The window openers are either installed surface mounted or integrated into the profile.
The locking is provided by an additional locking roller of the proven window hardware. This maintains the performance features tested to EN14351-1, such as resistance to driving rain and joint permeability of the window.
FVB locking drives are used for the reliable locking and unlocking of all common types of windows, irrespective of the opening direction.
Users of FVB locking drives consist primarily of window and façade fitters.
DOWNLOADS
- Data sheetFVB3 / FVB4 24V DC
- Installation instructionsAssembly and Commissioning Instructions
- Application examples FVB
- BracketsFVB
- Catalogue Aumuller 2016Products
- Catalogue Aumuller 2016Control units
- Declaration of conformity FV - FVB - FVR - FVM - OFV
- Environmental product decl. EPD drives
- NSHEV EN12101-2 - Re1000+FVB + FTA600 on side-hung window
- EN14351-1 - 20,.000 cyclesFVB + KS2 on side-hung window
- NSHEV EN12101-2 - B300FVB + FTA600 on side-hung window
- NSHEV EN12101-2 - B300FVB + KS2 on side-hung window