NTS 1 24V 500N

Reference number:

NTS1-0100-024-000 : 100mm 24 VDC 0,9 A 500 N 13mm/sec.
NTS1-0150-024-000 : 150mm 24 VDC 0,9 A 500 N 13mm/sec.
NTS1-0200-024-000 : 200mm 24 VDC 0,9 A 500 N 13mm/sec.
NTS1-0300-024-000 : 300mm 24 VDC 0,9 A 500 N 13mm/sec.
NTS1-0400-024-000 : 400mm 24 VDC 0,9 A 500 N 13mm/sec.
NTS1-0500-024-000 : 500mm 24 VDC 0,9 A 500 N 13mm/sec.

Mention the desired references

##

NTS – Technical data

Voltage / Current:      24VDC (19…30 VDC)  / 0,9A

Voltage / Current:      230VAC (90-265 VAC) / <25VA

Compressive-,

Tensile force:            500 / 1000 / 1500N (see type plate)

Static loading :           2000N

Speed:                       max. 3 / 13mm/sec. (see type plate)

Protection level:         IP55

Duty cycle:                50%

Temperature ranges: -20°C to +60°C

NTS – Description

The spindle actuator NTS1 consists of a spindle and a strong gear motor. An integrated control system shuts down the actuator automatically in the end positions as well as in case of obstructions (overload cut-off). The main advantage of this actuator is that it can be customized to your requests. Optionally two actuators can run absolute synchronously and/ or put out potential-free signal contacts in each end position.

  • extended stroke infinitely variable, stroke length 100/150/200/300/400/500mm ( > strokes on request)
  • max. speed 13mm/sec. in 500N version and 3mm/sec. in 1000N version
  • IP55, NRWG and RWA suitable, CE and ROHS compliant
  • for 230VAC a switching relay for groups isn’t necessary
  • as an option tandem run of two actuators
  • limit stop OPEN/CLOSED by micro switch and additional overload cut-off
  • very narrow, only 44mm
  • colour: silver anodized EV1 (RAL colours on request)
  • including entire fixing accessories (slidable rotary-mounting bracket and front bracket)

Installation

The spindle actuator NTS1 is installed into the dovetail track using the sliding blocks and the U-bracket. A rigid console for the screw fastening is also available.

Electrical connection:

19 – 30 VDC voltage (in the 24V direct current version),
or 190 – 265 V 50Hz (in the 230V alternating current version)

NTS – Specifications

NTS – Accessories

Remote control:
GO-1 handheld transmitter 1-channel, ETR radio system (433 MHz) and
GO-er external receiver, ETR radio system (433 MHz).

Dimensions

Brackets in the package

  • spindle actuator with 1m long connector cable
  • U- bracket and 2 sliding blocks, as well as all fastening screws

DOWNLOADS

Technical information