Home > Smoke & heat ventilation > Spindle actuators > PLA116 S3/S12 24V 1600N

PLA116 S3/S12 24V 1600N

Reference number:
PROGRAMMABLE
100mm/s L 442mm PLA 116 S12 : 565510
200mm/s L 542mm PLA 116 S12 : 565520
300mm/s L 642mm PLA 116 S12 : 565530
400mm/s L 742mm PLA 116 S12 : 565540
500mm/s L 842mm PLA 116 S12 : 565550
600mm/s L 942mm PLA 116 S12 : 565560
750mm/s L 1092mm PLA 116 S12 : 565575		 NOT PROGRAMMABLE
100mm/s L402mm PLA 116 S3: 565310
200mm/s L 502mm PLA 116 S3 : 565320
300mm/s L 602mm PLA 116 S3 : 565330
400mm/s L 702mm PLA 116 S3 : 565340
500mm/s L 802mm PLA 116 S3 : 565350
600mm/s L 902mm PLA 116 S3 : 565360
750mm/s L 1052mm PLA 116 S3 : 565375

Mention the desired references

Ask price Quotation
##

PLA – Technical Data

Rated voltage 24V DC / 0,8 A – 2,5 A
 

Cut-off switch

 S3 – Load dependent cut-off switch with programmable motion monitored run (up to 300 mm stroke) and sequence control
S12 – Intelligent programmable cut-off switch S12; programmable for synchrosnised run and special functions
Pushing/Pulling force 600 N – 1600 N (depending on series)
Stroke 50 – 1000 mm  – (S12 version programmable)
Speed 4,0 – 12,6 mm/s – (S12 version programmable)
Housing (D x L) 36 mm, length depending on stroke
Opening mechanism Stainless steel spindle and spindle tube, ball beared with end postion damping
Protection rating IP 65
Certification NSHEV compliant with EN 12101-2

PLA116 – Version

Cut-off switch
S3 – Integrated, internal load dependend cut-off switch, post cycle resistant
S12 – Internal intelligent cut-off switch

PLA – Options

  • Housing finish according to RAL
  • Extension of lead length
  • Mechanical stroke reduction
  • Front spindle tube with interior thread M8 or M10
  • Eye-bolts and clevis brackets for front and rear suspension
  • S3 – Programmable synchronised multi drive operation / sequence control
  • S12 – Special functions programmable (synchronised multi drive operation,
    electronic stroke reduction, closing force, speed)
  • Further options on request

PLA – Highlights

  • Electronic speed regulation for synchronous motor running and low noise development
  • Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
  • Suitable for surface mounted drives and concealed fitting within profiles
  • Robust, corrosion-resistant design
  • Universal brackets and casement brackets for all common profile systems
  • Various accessories for front and rear suspension
  • External modules for feedback of end-positions “OPEN” or “CLOSED”
  • Programmable parameters of intelligent S12 electronic cut-off switch:
    •  Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
    • Soft-start and soft-stop at the end positions
    •  Stroke length, closing force, speed
    •  Rebate control

PLA – Mounting

AUMÜLLER spindle drives can be used in SHEV systems and as well as for natural ventilation via automated windows, mainly in the roof area, but also in façades.

The window openers are installed surface mounted. The preferred installation locations are window frames (main closing edge or the side closing edge).

The area of application includes large, heavy to very heavy side-hung, bottom-hung, top-hung, friction hinged and parallel outward opening windows and skylights.

Synchronous operation with multi drive applications is possible, as well as sequential controls with locking drives. In the series with microprocessor-controlled cut-off switch a synchronous operation is also possible – without additional devices.

DOWNLOADS

Technical information
Catalogues
Certificates