KSA S12 24V DC 600N

Numéro de référence :

KSA 250 S12 24V : 522725
KSA 300 S12 24V : 522730
KSA 400 S12 24V : 522740
KSA 500 S12 24V : 522750
KSA 600 S12 24V : 522760
KSA 800 S12 24V : 522780
KSA 1000 S12 24V : 522810
KSA 1200 S12 24V : 522812

KSA 250 S12 24V Z : 522723
KSA 300 S12 24V Z : 522733
KSA 400 S12 24V Z : 522743
KSA 500 S12 24V Z : 522753
KSA 600 S12 24V Z : 522763
KSA 800 S12 24V Z : 522783
KSA 1000 S12 24V Z : 522813
KSA 1200 S12 24V Z : 522823
KSA 1500 S12 24V Z : 522853
KSA 1500 S12 24V : 522815

Indiquer la référence souhaitée

Demande de devis

KSA – Technical Data

Tension d’alimentation	24V DC
Absorption du courant en charge nominale	0,9 A
Absorption du courant en charge nominale en fin de course	1,2 A
Puissance absorbée en charge nominale	22 W
Fréquence d’utilisation	30% (ON: 3 min./OFF: 7 min.)
Indice de protection des dispositifs électrique	IP32
Température de fonctionnement	-5°C … +75°C
Force de traction	600 N
Force de poussée
Force statique	3.000 N
Chaîne	Acier inoxidable
Câble	Plug-in à la gauche et à la droite Câble non-halogène gris – 5 x 0,5 mm², ̴ 3 m
Course (s) Longueur moteur (L)	250 – 1500 mm (± 5%) C 250 mm = L 515 mm C 300 mm = L 591 mm C 400 mm = L 591 mm C 500 mm = L 693 mm C 600 mm = L 693 mm C 800 mm = L 794 mm C 1000 mm = L 896 mm C 1200 mm = L 998 mm C 1500 mm = L 1151 mm
Vitesse	Course < 400 : ouv. 8,0 mm/s – ferm. 8,0 mm/s Course 500 – 600 : ouv. 12,0 mm/s – ferm. 8,0 mm/s Course > 600 : ouv. 13,5 mm/s – ferm. 8,0 mm/s
Fonctions programmables	Course – Force – Vitesse – Soft-start – soft-close – soft-stop
Feedback-limite programmable	S12 24V DC Non	S12 24V DC “ouvert” ou “fermée” (max. 24V, 500 mA)
Branchement en parallèle	Jusqu’à 8 moteurs
EFC	Oui
Encastrable	Non
Réglage fin de course	Electronique
Habillage	Aluminium anodisé
Synchronisation	Via M-COM pour la configuration automatique

KSA – Version

Cut-off switch	S12 – Integrated, intelligent load dependend cut-off switch
Versions	Z – Programmable feedback limit position „OPEN“ and „CLOSE“ (max. 24V / 0,5A)

KSA – Options

Aluminium housing anodized finish according to RAL
Extension of lead length
Electronic stroke reduction
Mechanical stroke reduction in 25mm steps
Special functions programmable
M-COM for automatic synchronised run of multi drive systems and automatic sequence control with FV locking drives (S3/S12 SW V2)
Further options on request

KSA – Highlights

Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation
Z-version: programmable feedback limit position “OPEN” or “CLOSE”
TWIN- or D-type version with 2 chains and double force
Suitable for surface mounted drives
Robust, corrosion-resistant design
Universal brackets and casement brackets for all common profile systems
Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height
The connection cable can be run out of the housing on either side
Programmable parameters of intelligent S12 electronic cut-off switch:
- Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
- Soft start and soft stop at the end of stroke control
- Stroke length, closing force, speed
- Rebate control
M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2)

KSA – Mounting

Due to their slim design, chain drives from AUMÜLLER lie flat on the window profiles. They can be used in SHEV systems and for natural ventilation via automated windows, mainly in façades.

The window openers are installed either installed surface mounted or integrated into the profile. The preferred installation locations are window frames (main closing edge or side closing edge).

It is also possible to mount chain drives to side-hung, bottom-hung, top-hung, friction hinged and parallel outward opening windows.

Because of a microprocessor-controlled load dependend cut-off switch, synchronous operation with multi drive applications or sequential controls with locking drives or object-specific special solutions are possible without additional devices.