KS2 TWIN S12 24V DC 500N

Referentienummer:

KS2 TWIN 200 S12 24V : 521820
KS2 TWIN 200 S12 24V Z : 521823
KS2 TWIN 400 S12 24V : 521840
KS2 TWIN 400 S12 24V Z : 521843
KS2 TWIN 500 S12 24V : 521850
KS2 TWIN 500 S12 24V Z : 521853
KS2 TWIN 600 S12 24V : 521860
KS2 TWIN 600 S12 24V Z : 521863

Noteer de gewenste referenties

Vraag prijsofferte

KS2 TWIN – Technical Data

Voor zowel INBOUW als OPBOUW

Nominaal Voltage	24V DC
Nominale stroom	1,4 A
Afschakeling stroom	2,0 A
Nominaal vermogen	34 W
Arbeidscyclus	30% (ON: 3 min./OFF: 7 min.)
Beschermingsgraad elektrische inrichting	IP32
Gebruikstemperatuur	-5°C … +75°C
Maximale trekkracht	500 N
Duwkracht
Uittrekkracht	1.800 N
Ketting	Roestvrij staal
Kabel	Vaste kabel links of rechts naar keuze Halogeenvrije kabel grijs – 3 x 0,5 mm², ̴ 3 m Z-versie : 5 x 0,5 mm², ̴ 3 m
Koerslengte (s) & Lengte motor (L)	50 – 1000 mm (± 5%) C 200 mm = L 640 mm – LM 354 mm C 400 mm = L 830 mm – LM 544 mm C 500 mm = L 1060 mm – LM 774 mm C 600 mm = L 1060 mm – LM 774 mm
Snelheid	duw 10,0 mm/s trek 10,0 mm/s
Programmeerbare functies	Koerslengte – Kracht – Snelheid Soft-start – soft-close – soft-stop
Programmeerbare feedback- Limiet “open” of “dicht”	“open” of “dicht” Z-versie : 5 x 0,5 mm², ̴ 3 m
Parallel schakeling	t.e.m. 8 motoren
RWA	Ja
Inbouw	Ja
Eindeloop	Elektronische eindeloop
Behuizing	Geanodiseerd aluminium
Synchronisatie	Via M-COM voor automatische synchronisatie

KS2 TWIN – Version

Cut-off switch	S12 – Internal, intelligent load dependend cut-off switch
Version	Z-Version: Programmable feedback limit position „OPEN“ and „CLOSE“ (max. 24 V, 500 mA)

KS2 TWIN – Options

Aluminium housing anodized finish according to RAL
Extension of lead length
Electronic stroke reduction
Special functions programmable
M-COM for automatic synchronised run of multi drive systems and automatic sequence control with FV locking drives (S3/S12 SW V2)
Further options on request

KS2 – Highlights

Electronic speed regulation for synchronous motor running and low noise development
Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
Suitable for surface mounted drives and concealed fitting within profiles
Rigid drive mounting on frame without brackets
Universal brackets and casement brackets for all common profile systems
Sidebow roller chain of high-quality stainless steel for large opening angles with the smallest possible bending radii
The chain completely retracts into the housing to ease profile integrated mounting of the drives
Z-version: programmable feedback limit position “OPEN” or “CLOSE”
TWIN-version with 2 chains and double force
Programmable parameters of intelligent S12 electronic cut-off switch:
- Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
- Soft-start and soft-stop at end of stroke control
- Rebate control
M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2)

KS2 – Mounting

Due to their compact design, the housings of KS2 chain drives from AUMÜLLER lie flat on the window profile and do not protrude into the room. The drives can be used in SHEV systems and for natural ventilation via automated windows, mainly in façades.

The window openers are either installed surface mounted or integrated into the profile. The preferred installation locations are window frames (main closing edge or the side closing edge).

It is possible to mount chain drives to inward- or outward opening side-hung, bottom-hung, top-hung, friction hinged, or parallel outward opening windows.

Because of a microprocessor-controlled load dependent cut-off switch, synchronous operation with multi drive applications or sequencial controls with locking drives or object-specific special solutions are possible without additional devices.