KS2 TWIN S12 24V DC 500N

Numéro de référence :

KS2 TWIN 200 S12 24V : 521820
KS2 TWIN 200 S12 24V Z : 521823
KS2 TWIN 400 S12 24V : 521840
KS2 TWIN 400 S12 24V Z : 521843
KS2 TWIN 500 S12 24V : 521850
KS2 TWIN 500 S12 24V Z : 521853
KS2 TWIN 600 S12 24V : 521860
KS2 TWIN 600 S12 24V Z : 521863

Indiquer la référence souhaitée


KS2 TWIN – Technical Data

Voor zowel INBOUW als OPBOUW

Tension d’alimentation 24V DC
Absorption du courant en charge nominale 1,4 A
Absorption du courant en charge nominale

en fin de course

2,0 A
Puissance absorbée en charge nominale 34 W
Fréquence d’utilisation 30% (ON: 3 min./OFF: 7 min.)
Indice de protection des dispositifs électrique IP32
Température de fonctionnement -5°C … +75°C
Force de traction 500 N
Force de poussée
Force statique 1.800 N
Chaîne Acier inoxidable
Câble Câble fixe gauche ou droit à votre choix

Câble non-halogène gris 3 x 0,5 mm2, ̴ 3 m

Course (s)

Longueur moteur (L)

Distance entre chaînes (LM)

50 – 1000 mm (± 5%)

C 200 mm = L 640 mm – LM 354 mm

C 400 mm = L 830 mm – LM 544 mm

C 500 mm = L 1060 mm – LM 774 mm

C 600 mm = L 1060 mm – LM 774 mm

Vitesse Ouv. 10,0 mm/s

Ferm. 10,0 mm/s

Fonctions programmables Course – Force – Vitesse

Soft-start – soft-close – soft-stop

Feedback-limite programmable


“ouvert” ou “fermée”

Z-version : 5 x 0,5 mm2, ̴ 3 m

Branchement en parallèle Jusqu’à 8 moteurs
Encastrable  Oui
Réglage fin de course Electronique
Habillage  Aluminium anodisé
Synchronisation Via M-COM pour la configuration automatique

KS2 TWIN – Version


Cut-off switch S12 – Internal, intelligent load dependend cut-off switch
Version Z-Version: Programmable feedback limit position „OPEN“ and „CLOSE“ (max. 24 V, 500 mA)

KS2 TWIN – Options

  • Aluminium housing anodized finish according to RAL
  • Extension of lead length
  • Electronic stroke reduction
  • Special functions programmable
  • M-COM for automatic synchronised run of multi drive systems and automatic sequence control with FV locking drives (S3/S12 SW V2)
  • Further options on request

KS2 – Highlights

  • Electronic speed regulation for synchronous motor running and low noise development
  • Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
  • Suitable for surface mounted drives and concealed fitting within profiles
  • Rigid drive mounting on frame without brackets
  • Universal brackets and casement brackets for all common profile systems
  • Sidebow roller chain of high-quality stainless steel for large opening angles with the smallest possible bending radii
  • The chain completely retracts into the housing to ease profile integrated mounting of the drives
  • Z-version:  programmable feedback limit position “OPEN” or “CLOSE”
  • TWIN-version with 2 chains and double force
  • Programmable parameters of intelligent S12 electronic cut-off switch:
    •  Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
    •  Soft-start and soft-stop at end of stroke control
    •  Rebate control
  • M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2)

KS2 – Mounting

Due to their compact design, the housings of KS2 chain drives from AUMÜLLER lie flat on the window profile and do not protrude into the room. The drives can be used in SHEV systems and for natural ventilation via automated windows, mainly in façades.

The window openers are either installed surface mounted or integrated into the profile. The preferred installation locations are window frames (main closing edge or the side closing edge).

It is possible to mount chain drives to inward- or outward opening side-hung, bottom-hung, top-hung, friction hinged, or parallel outward opening windows.

Because of a microprocessor-controlled load dependent cut-off switch, synchronous operation with multi drive applications or sequencial controls with locking drives or object-specific special solutions are possible without additional devices.


Technical information