Numéro de référence :
KS4 400 S12 24V L (gauche) : 522540
KS4 500 S12 24V R (droite) : 522440

Pour montage


KS4 400 S12 24V L (gauche) : 522640
KS4 500 S12 24V droite : 522340

Pour montage


Indiquer la référence souhaitée


KS4 FLEX – Technical Data

Encastrable et en applique

Nominaal Voltage 24V DC
Nominale stroom 0,6 A
Afschakeling stroom 0,8 A
Nominaal vermogen 22 W
Arbeidscyclus ED30% (ON: 3 min./OFF: 7 min.)
Beschermingsgraad elektrische inrichting IP32
Gebruikstemperatuur -5°C … +60°C
Maximale trekkracht 200 N
Uittrekkracht 1.800 N
Ketting Flexibel Roestvrij staal
Kabel Plug-in aan beide zijden (links & rechts)
Halogeenvrije kabel grijs – 5 x 0,5 mm2, ̴ 2 m
Koerslengte Max 400 mm
Lengte motor 665 mm
Snelheid Koerslengte < 400 : duw 8,0 mm/s – trek 8,0 mm/s
Programmeerbare functies Koerslengte – Kracht – Snelheid
Soft-start – soft-close – soft-stop
Programmeerbare feedback-Limiet “open”
Parallel schakeling t.e.m. 8 motoren
Inbouw Ja
Eindeloop Elektronische eindeloop
Behuizing Geanodiseerd aluminium
Synchronisatie Via M-COM voor automatische synchronisatie

KS4 FLEX- Version

Cut-off switch S12 – Integrated, intelligent load dependend cut-off switch, M-COM suitable
Versions L – Left version, with programmable feedback limit position « OPEN » or « CLOSE » (max. 24V / 0,5A)

KS4 FLEX – Options

  • Drive housing painted/powder coated in other RAL colours
  • Lump sum for coating
  • M-COM® Click Confi guration module for synchronised multi-drive systems
  • M-COM Confi guration module for synchronised multi-drive systems
  • Concealed mounting inside profi les

KS4 FLEX – Highlights

Flexible „side bow chain“ for narrow high windows
Attached assembly with casement bracket F42
Application: natural ventilation, SHEV, ferralux®-NSHEV
Internal Intelligent Control Electronics S12
Feedback limit position „CLOSE“ (max. 24 V, 500 mA)
Additional AUMÜLLER-Click plug set for multi-drive operation
Programmable special functions
Programmable feedback limit position „OPEN“ (max. 24V, 500 mA)
M-COM for automatic synchronised run of multi drive systems and automatic sequence
control with locking drives (S3 / S12)

KS4 FLEX – Mounting

Due to their compact design, the housings of KS4 chain drives from AUMÜLLER lie flat on the window profile and do not protrude into the room. The drives can be used in SHEV systems and for natural ventilation via automated windows, mainly in façades.

The window openers are either installed surface mounted or integrated into the profile. The preferred installation locations are window frames (main closing edge or the side closing edge).

It is possible to mount chain drives to inward- or outward opening side-hung, bottom-hung, top-hung, friction hinged, or parallel outward opening windows.

Because of a microprocessor-controlled load dependent cut-off switch, synchronous operation with multi drive applications or sequencial controls with locking drives or object-specific special solutions are possible without additional devices.


Informations techniques