KS4 S12 24V DC R/L 200N FLEXIBELE KETTING 90°

Referentienummer:

KS4 400 S12 24V L : 522540
KS4 500 S12 24V R : 522440

Voor OPBOUW

KS4 400 S12 24V L : 522640
KS4 500 S12 24V R : 522340

Voor INBOUW

Noteer de gewenste referenties

Vraag prijsofferte

KS4 FLEX – Technical Data

Voor zowel INBOUW als OPBOUW

Nominaal Voltage	24V DC
Nominale stroom	0,6 A
Afschakeling stroom	0,8 A
Nominaal vermogen	22 W
Arbeidscyclus	ED30% (ON: 3 min./OFF: 7 min.)
Beschermingsgraad elektrische inrichting	IP32
Gebruikstemperatuur	-5°C … +60°C
Maximale trekkracht	200 N
Uittrekkracht	1.800 N
Ketting	Flexibel Roestvrij staal
Kabel	Plug-in aan beide zijden (links & rechts) Halogeenvrije kabel grijs – 5 x 0,5 mm2, ̴ 2 m
Koerslengte	Max 400 mm
Lengte motor	665 mm
Snelheid	Koerslengte < 400 : duw 8,0 mm/s – trek 8,0 mm/s
Programmeerbare functies	Koerslengte – Kracht – Snelheid Soft-start – soft-close – soft-stop
Programmeerbare feedback-Limiet	“open”
Parallel schakeling	t.e.m. 8 motoren
RWA	Ja
Inbouw	Ja
Eindeloop	Elektronische eindeloop
Behuizing	Geanodiseerd aluminium
Synchronisatie	Via M-COM voor automatische synchronisatie

KS4 FLEX- Version

Cut-off switch	S12 – Integrated, intelligent load dependend cut-off switch, M-COM suitable
Versions	L – Left version, with programmable feedback limit position “OPEN” or “CLOSE” (max. 24V / 0,5A)

KS4 FLEX – Options

Drive housing painted/powder coated in other RAL colours
Lump sum for coating
M-COM® Click Confi guration module for synchronised multi-drive systems
M-COM Confi guration module for synchronised multi-drive systems
Concealed mounting inside profi les

KS4 FLEX – Highlights

Flexible „side bow chain“ for narrow high windows
Attached assembly with casement bracket F42
Application: natural ventilation, SHEV, ferralux®-NSHEV
Internal Intelligent Control Electronics S12
Feedback limit position „CLOSE“ (max. 24 V, 500 mA)
Equipment
Additional AUMÜLLER-Click plug set for multi-drive operation
Options
Programmable special functions
Programmable feedback limit position „OPEN“ (max. 24V, 500 mA)
M-COM for automatic synchronised run of multi drive systems and automatic sequence
control with locking drives (S3 / S12)

KS4 FLEX – Mounting

Due to their compact design, the housings of KS4 chain drives from AUMÜLLER lie flat on the window profile and do not protrude into the room. The drives can be used in SHEV systems and for natural ventilation via automated windows, mainly in façades.

The window openers are either installed surface mounted or integrated into the profile. The preferred installation locations are window frames (main closing edge or the side closing edge).

It is possible to mount chain drives to inward- or outward opening side-hung, bottom-hung, top-hung, friction hinged, or parallel outward opening windows.

Because of a microprocessor-controlled load dependent cut-off switch, synchronous operation with multi drive applications or sequencial controls with locking drives or object-specific special solutions are possible without additional devices.